Wednesday, April 18, 2012

Pineapple Upside Down Cake

Pineapple Upside Down Cake



I made this cake yesterday with a few modifications and it was just so good! I used a 13X9 glass cake pan. I used pineapple chunks - that way everyone gets some pineapple. Since I used a different pan, I did not bake it for 1 hour. After 35 minutes, a beautiful pineapple smell enticed me to look at how the cake was doing. It was getting brown on top, actually a dark brown, so I put a sheet of aluminum foil on top so it would not burn. I waited about 5-10 minutes longer, put a toothpick in the middle and took the cake out of the oven. The toothpick came out clean (it was done!) so I inverted the cake on a cookie pan. This cake was just so good! My husband ate so many pieces that I had to put it away. You just have to try it!

Here is the recipe from Duncan Hines :

Hands-On Time: 10 minutes
Total Time: 1 hour and 15 minutes
Servings: Makes 16 to 20 servings.
Rating: 5 stars

Ingredients:
Topping:

· 1/2 cup (1 stick) butter or margarine

· 1 cup firmly packed brown sugar

· 1 (20 oz) can pineapple slices

· Maraschino cherries

Cake:

· 1 pkg Duncan Hines® Moist Deluxe® Pineapple Supreme Cake Mix

· 1 (3.4 oz) pkg vanilla instant pudding and pie filling

· 4 large eggs

· 1 cup water

· 1/2 cup oil

Baking Instructions

1. Preheat oven to 350°F.

2. For topping, melt butter over low heat in 12-inch cast-iron skillet or skillet with oven-proof handle. Remove from heat. Stir in brown sugar. Spread to cover bottom of skillet. Arrange pineapple slices, Maraschino cherries and walnut halves in skillet. Set aside.

3. For cake, combine cake mix, pudding mix, eggs, water and oil in large mixing bowl. Beat at medium speed with electric mixer for 2 minutes. Pour batter evenly over fruit in skillet.

4. Bake at 350 ºF for 1 hour or until toothpick inserted in center comes out clean. Invert onto serving plate.

Copyright © 2012 Pinnacle Foods Corp. LLC. All Rights Reserved.

Sunday, April 15, 2012

Tiny Tip Tuesday: Growing Onions in Water

What a great idea! You can grow green onions in water and have a never ending supply!


Check out this tutorial on
Tiny Tip Tuesday: Growing Onions in Water

Friday, April 13, 2012

How to Whistle With Your Fingers


I saw this on the following site: The Art of Manliness. I have always wanted to be able to whistle with my fingers and was in awe of others who were able to do it.So when I saw these instructions, I got real excited! I have decided to try this - he says it is important to practice until you get it. I am willing to try - how about you?
Ever since I was a kid, I’ve wanted to know how to give a commanding whistle with my fingers in my mouth. You know. The kind you see people give in old movies when they’re hailing a taxi or trying to get the peanut guy’s attention at the ballpark. It just seemed like a cool skill to have. But alas, I’ve spent my entire young and adult life frustrated that I couldn’t uncover the secret to this age old trick.
Many of you out there reading the blog feel the same way. Believe it or not, covering how to whistle with your fingers has been one of our most requested articles. Most of the emailers shared how they had a grandpa or dad who knew how to give a loud, forceful whistle with their fingers (in my case, my mom was the master of this kind of whistle). Like me, they thought it was a cool skill, but one which unfortunately hadn’t been passed onto them.
So I finally made it a goal to once and for all figure out how to whistle with my fingers, so that I could create an AoM tutorial on the subject. After just forty minutes of annoying my wife with intense practice, I finally mastered the skill that had eluded me since I was eight years old. Achievement unlocked!
Below, I show how you too can whistle with your fingers.

Choose Your Finger Combination

Your fingers do two things that allow you to create an ear-piercingly loud whistle. First, they keep your tongue pushed back, and second, they keep your lips tucked back over your teeth. The pushed back tongue and tucked lips will create a bevel which will produce a tone when you blow.
There are a myriad of finger combinations you can use to get the desired effect. I’m going to show you my two favorites.
Two-Handed, Middle/Index Finger Combo
Extend your middle and index fingers on both hands, keeping them close together, while your thumbs hold down your ring and pinky fingers.
Place your two middle fingers together, forming an “A” shape. [See Fig. 1]
I feel like I get a louder and more forceful whistle using this finger combo.
One-handed, O.K. Sign 
This combo allows you to whistle with just one hand. All you need to do is form an “OK” sign with either your thumb and index finger or thumb and middle finger.

Wet and Tuck Your Lips Back Over Your Teeth

Lip placement is key. Give your lips a quick lick to wet your whistle. Tuck your lips back over your teeth. It’s what you do when you pretend you’re an old man without any teeth. Your lips need to cover your teeth in order to whistle successfully. [See Fig 2.] Feel free to adjust how much or little you tuck your lips back. It’s going to vary from person to person.
Your fingers will help keep your bottom lip tucked over your teeth.

Push Tongue Back Into Mouth With Fingers

This step is master key of successfully whistling with your fingers and also the trickiest to get right. It was for me at least.
Some people say you just need to push your tongue back in your mouth with your fingers. That advice was a bit too vague for me.
What worked for me was folding the tip of my tongue back on itself and holding it in place with my fingers, as you see in Fig. 3. Here’s how to do it with the two-handed, middle/index finger combo.
  • Place the tip of your fingers underneath your tongue right at the tip.
  • Push the tip of your tongue back with your fingers. You’re basically folding the first 1/4 of your tongue back on itself.
  • Push your tongue back into your mouth until your first knuckle reaches your bottom lips.
Same principles apply if you’re using the one-handed, O.K. sign combo.
Again, this method worked for me. Others do it a little differently–often pushing the tongue in without really folding it over. Experiment to find what works for you.

Blow

With your fingers in your mouth, keeping the tip of your tongue folded and lips tucked back over your teeth, close your mouth around your fingers. You want to make sure you have a complete seal around your fingers.
Here’s how it should look:
Give a soft blow out your mouth. You should feel the air only go out over your bottom lip. If you feel air coming out the sides of your mouth, close your mouth tighter around your fingers. Remember, perfect seal.
Make sure you don’t see your tongue make an appearance in the hole between your fingers! It’s blocking the air from coming out.
You probably won’t get a sound right off the bat. That’s okay. Adjust your finger placement under your tongue and experiment with different finger angles and varying degrees of lip tuckage until you find the sweet spot. Experimentation is key–keep making little adjustments. You’ll know when you’re getting close to your whistle sweet spot because you’ll start producing a noise that sounds sort of like you’re blowing over a beer bottle. Start blowing more forcefully, until you get that high-pitched and loud whistle.
A word of warning: make sure to take a break between blows when you’re first starting out. I’m not kidding. If you keep blowing and blowing, you’ll just hyperventilate, make yourself feel lightheaded and dizzy, and give yourself a headache.

Practice

Keep practicing until you get it. I was able to get it down after 40 minutes of dedicated practice broken up over two days. If you’re married or live with other people, go outside or in a room to avoid driving your loved ones insane. A good time to practice is when you’re stopped at traffic lights while driving alone. Once you figure it out, you’ll wonder why it took you so long to master this awesome skill!

Thursday, April 12, 2012

Vintage Baby Quilt


Vintage Baby Quilt by YoYo Mama. 

I saw this easy baby quilt on the Ingrid Barlow Site and thought "Well, that's a great idea!". I am always looking for an easy way to do things. I also thought that maybe I could just put appliques on it. So many ideas - so little time! 

This is what Ingrid had to say: "You simply place your little squares on top of another piece of fabric + batting + backing, and you sew down the edges.  Throw it in the wash and poof!  There you have it.  This is a good one for all you wanna be quilters.  No piecing involved!".

Tuesday, April 03, 2012

FLORIANI HEAT N SHRINK AND FREE-MOTION QUILTING

\



This is so neat! You take a fabric that has flowers or any shape that you want to make puffy. You will use Floriani Heat N Shrink with some batting and sew the lines of the flower. Then you you steam it and it puckers up! The uses are endless - applique on a wall hanging, quilt, purse, or you can do the entire piece of flowered fabric and use it to make a child's dress or nightgown.


The directions come from the Prudent Baby site  and they are very clear to understand. This should be easy to make.




Above is the Heat N Shrink that was used and although a little pricey, it will last you for many designs. The site has additional pictures that you can see the difference in flowers that this method is used on and other flat flowers. 
Below is some of the directions that is on the site:
  • I cut a square the size of the large flower in my Sandi Henderson Fabric. Then I layered a square of low-loft batting in-between the Heat N Shrink and the back of the fabric, pinning in place.(The batting is optional but does add a nice puff to the petals.) 
  • Next I attached my quilting foot and lowered my feed dogs so I could try some free-motion quilting around the edge of the flower. Then just stitch along every line of the design. It takes a little practice, mostly you have to remember to move your fabric by hand. 
  • Since your fabric will be all bunchy later, it doesn’t have to be perfect. 
  • You can stitch lines, grids, dots or any design



Monday, April 02, 2012

Color Me Quilty: Painting Quilts

I just love this idea of painting quilts! This quilter used Lumiere paints by Jaquard to paint the quilt. She said that the quilt shimmered in the light.


Can you imagine the different ways that you can use the paints on quilts?

She used the paints without any mixing, applied by a small paint brush. They covered amazingly well.
Here is more detail:




And here is the link:  Color Me Quilty



Thursday, March 29, 2012

Ruffled Yellow Felt Pillow

I saw these just beautiful pillows on the Better Homes and Gardens site and just fell in love with them. I will have to make some of these! The colors in the picture seem so Springy but I am not sure that it will work with my furniture. Maybe I will try some different colors. The following sewing instructions are for one pillow. If you go to the Better Homes and Gardens link, the other pillow instructions are there.


Green and yellow pillows with ruffles and pleats.

Enlarge Image

Crafts Supplies:
  • Felt (yellow) 
  • 3/8-inch-wide velvet ribbon (green) 
  • Fiberfill 
Sewing Instructions:
  • Cut a strip of felt 9 inches wide and 18 inches long and hand-stitch two parallel lines close together through the center of the strip. Pull on the ends of each thread so felt strip gathers into a ruffle. 
  • Make a 6-inch-wide ruffle in the same manner. Machine-stitch the 6-inch ruffle in the middle of the larger ruffle. 
  • Cut two 12-inch squares from felt. 
  • Machine-stitch the double ruffle in the center of one square. 
  • Pin a piece of velvet ribbon in the center of the double ruffle. 
  • Place the squares right sides together and machine-stitch around edges, leaving a small opening along one edge for turning. Make sure you catch the ends of the velvet ribbon in the seams. 
  • Turn right side out and stuff with fiberfill. Hand-stitch the opening closed.

Wednesday, March 28, 2012

Stainless Steel Cleaner

Last year, I bought a stainless steel refrigerator. I love it! The freezer is on the bottom and it is so easy to get the items I need from the refrigerator on top. There is one thing that I do not like - the fingerprints that are all over the doors (actually, there are 2 things I do not like - the doors of the frig are not magnetic! Who would have thought? Where will all my magnets go?). I have tried various cleaners and low and behold, nothings seems to do the job!


I saw this DIY cleaner on Pinterest - yes I am addicted! I admit I spend way too much time pinning but I have learned so much. 


Anyway, here are the ingredients: Homemade stainless steel cleaner - In a spray bottle, I mix together 2/3 parts white vinegar, a few drops of dish soap, and 1/3 part water. Spray the frig and wipe with a microfiber cloth




Here is the before picture:



Here is the after picture (this is the picture from the tutorial):



Here is the link: Home Stories A to Z

Tuesday, March 27, 2012

Bite Size Banana Cream Pie



I saw this recipe on the  Food Pusher Blog and thought - Wouldn't this be great for a party or even Easter - Yes!. So I copied it here. This recipe would give everyone an opportunity to have a "little taste" of a sweet without ruining their diet. I plan to use Pillsbury ready-made crust - I know, but it is so easy. Let me know if you try it and what you think.

Bite Size Banana Cream Pie


Ingredients:

  •         1 small box instant vanilla pudding
  •          1 3/4 cups cold milk
  •          2-3 bananas, cut into 1/4-inch slices
  •          1 cup heavy whipping cream 
  •          1/4 cup powdered sugar
  •          1 batch of pie crust (see recipe below)

Directions:
  • In a medium bowl, whisk vanilla pudding mix and cold milk for 2 minutes.  
  • Cover with plastic wrap and refrigerate.  (I'm not sure how long. Mine refrigerated overnight.)
  • Whip heavy cream and powdered sugar into stiff peaks.
  • Using either a pastry bag with an open star tip, or using a zip-top bag with  about 1/4 inch of a corner cut off, pipe about half a teaspoon of chilled pudding onto each pie crust piece.  
  • Place a slice of banana on top of the dab of pudding.  
  • Then squeeze about 1 1/2 teaspoons of pudding onto each banana slice.
  • Refrigerate the pies while you prep the whipped cream into another pastry bag (or the same one with the tip washed), and then pipe about 1 1/2 teaspoons of whipped cream onto each pie.  
  • Refrigerate until  ready to serve.  
  • Makes...um...I'm not sure, but I'd guess about 3 dozen bite-size pies.


Monday, March 26, 2012

DIY: Chick & Bunny Treat Holders

I saw this tutorial and thought this would be 
so nice to do with children for Easter. They are so cute!
DIY: Chick & Bunny Treat Holders
This one’s for the kiddies… a fun little craft project + “friendly” holders for all those Easter Bunny treats!
PAPER BUNNY CUP Treat Holders
You’ll Need:
white paper cup
white cardstock
pink felt or pink cardstock
2 wiggle eyes
small pink pom-pom
medium white pom-pom (for tail)
white chenille stems
scissors, glue, glue dots or a stapler
Directions
• From the white cardstock, cut 2 large white ovals for the bunny ears. Trim one side of the oval off so it’s squared off at the bottom.
• Cut 2 smaller oval shapes from the pink felt (or paper) for the inner part of the ear. Glue the pink ovals in the center of the white ear shapes and set aside to dry.
• Cut white chenille craft stems into short pieces for the whiskers. Use craft glue or glue dots to attach the whiskers to the cup, then glue the pink pom pom on top for the nose.
• Attach the ears to the back rim of the cup with a stapler or glue dots.
• Glue the white pom pom to the back of the cup to create a cotton tail.
• Fill with a colorful Easter grass and candy treats!
*****
PAPER CHICK CUP Treat Holders
You’ll Need:
yellow paper cup
orange cardstock
orange chenille craft stems
2 wiggle eyes
yellow craft feathers
scissors, glue/glue dots, stapler or tape
Directions
• From the orange cardstock, cut a small triangle for the beak and glue it to the front of the cup.
• Glue the wiggle eyes above the beak.
• Cut six 3/4-inch pieces of orange chenille stem for the chick feet. Twist three pieces together at one end for each foot. Attach the feet to the front of the cup with glue dots or tacky craft glue.
• Staple or tape a few feathers to the back edge of the cup, making sure they peek out over the top.
• Fill with a colorful Easter grass and candy treats!
Here is the link to the blog that posted it. http://blog.hwtm.com/2009/04/diy-chick-bunny-treat-holders/