Again, I was looking for tutorials for making something for my grandchildren and found this one. It doesn't look difficult and I have lots of fabric. This tutorial was taken from the A Spoonful of Sugar site and thought "I could do that!". Have fun! Happy Easter!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I had a few requests for instructions on how to make the gathered round
basket that I made last week. This is an easy project and the baskets can
be made in any size, are fully reversible, and are useful for so many things.
Materials: (to make a basket measuring 4 1/2 inches diameter and
1 3/4 inches high)
(I
used a small side plate as a template)
Instructions:
1. Fuse the wadding to the fabric circle that will form the outside of
the basket, following manufacturers directions.
2. Baste the basket lining and basket outer together with the wrong
sides facing.
3. Using a long straight stitch, sew a gathering stitch around the
perimeter of the circle, close to the edge. Stitch a second gathering
stitch close to the first gathering stitch. Ensure both gathering stitches
are within the 1/4 inch seam allowance.
4. Gently pull the two ends of thread on the wrong side, the fabric
will gather along the thread.
5. Secure the threads at one end to prevent the stitches from pulling out.
6. Even out the gathers until the circumference of the circle measures approximately 12 inches. When all the gathers are in place, use a
standard machine stitch to stitch a 1/4 inch seam.
7. Press the binding strip in half lengthwise with the wrong sides facing.
8. Pin the binding to the outside of the basket and stitch in place.
9. Fold the binding over to the inside of the basket and stitch in place
by hand using a slip stitch to secure.
Edit 07/ 2012 - Just wanted to clarify in response to a few emails - The circles are 8 inches in
diameter (the measurement you get if you rule a line through the centre of the circle) and when
they are gathered they measure 12 inches in circumference (i.e all around the outside of the circle).
basket that I made last week. This is an easy project and the baskets can
be made in any size, are fully reversible, and are useful for so many things.
Materials: (to make a basket measuring 4 1/2 inches diameter and
1 3/4 inches high)
- 2 pieces of cotton fabric cut into circles with a 8 inch diameter
- 1 piece of fusible wadding (such as parlan or pellon) cut into a circle
- strip of fabric measuring 2 1/4 inch x 14 inch (for binding)
1. Fuse the wadding to the fabric circle that will form the outside of
the basket, following manufacturers directions.
2. Baste the basket lining and basket outer together with the wrong
sides facing.
3. Using a long straight stitch, sew a gathering stitch around the
perimeter of the circle, close to the edge. Stitch a second gathering
stitch close to the first gathering stitch. Ensure both gathering stitches
are within the 1/4 inch seam allowance.
will gather along the thread.
5. Secure the threads at one end to prevent the stitches from pulling out.
6. Even out the gathers until the circumference of the circle measures approximately 12 inches. When all the gathers are in place, use a
standard machine stitch to stitch a 1/4 inch seam.
8. Pin the binding to the outside of the basket and stitch in place.
by hand using a slip stitch to secure.
Edit 07/ 2012 - Just wanted to clarify in response to a few emails - The circles are 8 inches in
diameter (the measurement you get if you rule a line through the centre of the circle) and when
they are gathered they measure 12 inches in circumference (i.e all around the outside of the circle).
No comments:
Post a Comment